Bicarbonate and vinegar method

[fomayof928@mowline]

Pouring boiling water down the drain is one of the simplest and most effective ways to clear a clog caused by fat and grease.

Boil water: Bring a large pot or kettle of water to a boil.
Pour carefully: Pour the boiling water slowly down the drain, being careful not to splash yourself.
Repeat as necessary: ​​For stubborn clogs, you may need to repeat this process a few times.

Using sodium bicarbonate (baking soda) and eu phone numbers vinegar can create a foaming reaction that will help clear the clog.

Pour bicarb: Pour a half cup of baking soda down the drain.
Add vinegar: Follow with a cup of vinegar and quickly plug the drain to suppress the fizzing reaction.
Let stand: Allow the mixture to sit and fizz for about 30 minutes.
Flush with hot water: Once the hissing noise stops, run hot water down the drain to help remove any remaining debris.
Using Pipe Snake
A plumbing snake, also known as a drain auger, is a long, flexible metal cable used to break up clogs deep inside a drain pipe.



Insert the snake: Insert the plumbing snake into the drain until you meet resistance.
Rotating Snake: Turn the handle to break a jam.
Recover the snake: Pull the snake out and take away any debris.
Repeat as necessary: ​​You may need to repeat this process until the drain is clear.
Wet and dry vacuum
Wet and dry vacuum cleaners can create powerful suction to clear clogs.